Warnings And Cautions - Agilent Technologies 1200 Series Manual

Warnings and Cautions

Module is partially energized when switched off, as long as the power cord is
WA R N I N G
plugged in.
Repair work at the module can lead to personal injuries, e.g. shock hazard, when the
cover is opened and the module is connected to power.
➔
➔
➔
Sharp metal edges
WA R N I N G
Sharp-edged parts of the equipment may cause injuries.
➔
When opening capillary or tube fittings solvents may leak out.
WA R N I N G
The handling of toxic and hazardous solvents and reagents can hold health risks.
➔
Electronic boards are static sensitive and should be handled with care so as not to
C A U T I O N
damage them. Touching electronic boards and components can cause electrostatic
discharge (ESD).
ESD can damage electronic boards and components.
➔
1200 Series Quarternary Pump User Manual
Make sure that it is always possible to access the power plug.
Remove the power cable from the instrument before opening the cover.
Do not connect the power cable to the Instrument while the covers are removed.
To prevent personal injury, be careful when getting in contact with sharp metal
areas.
Please observe appropriate safety procedures (for example, goggles, safety gloves
and protective clothing) as described in the material handling and safety data sheet
supplied by the solvent vendor, especially when toxic or hazardous solvents are
used.
Be sure to hold the board by the edges and do not touch the electrical components.
Always use an ESD protection (for example, an ESD wrist strap) when handling
electronic boards and components.
Maintenance
Introduction to Repairing the Pump
7
71