Installing The Seat; Installing The Service Decal - Toro Greensmaster eTriFlex 3360 Operator's Manual

Left side of the machine shown
1. Nut (3/8 inch)
2. Roll bar
4. Torque the fasteners to 51 to 65 N∙m (38 to 48
ft-lb).
2

Installing the Seat

Parts needed for this procedure:
Seat Kit (order separately; contact your authorized
1
Toro distributor)
Procedure
Acquire the Seat Kit (contact your authorized Toro
distributor) and refer to the kit Installation Instructions
to install the seat.
Figure 3
3. Hex-head bolt (3/8 x 1-1/2
inch)
3

Installing the Service Decal

Parts needed for this procedure:
1 Service decal (Part No. 137-8132)
Procedure
Install the service decal (Part No. 137-8132) to the
seat; refer to Figure 4
No. 04729) or Figure 5
No. 04508).
g277676
Premium Seat (Model No. 04729)
1. Service decal
2. 2.5 cm (1 inch)
Standard Seat (Model No. 04508)
1. Service decal
8
for the premium seat (Model
for the standard seat (Model
Figure 4
3. 18.5 cm (6.5 inches)
Figure 5
g277096
g277097