Infocenter - Toro Greensmaster eTriFlex 3360 Operator's Manual

Figure 20
You can configure the maximum ground speed as
follows:
•
3.2 to 8 km/h (3 to 5 mph) forward mowing speed
•
8 to 16 km/h (5 to 10 mph) transport speed
•
3.2 to 4.8 km/h (2 to 3 mph) reverse speed
Steering-Arm-Locking Pedal
Press the pedal (Figure
steering arm for operator comfort, then, release the
pedal to lock the arm in place.
Brake Pedal
Press the brake pedal (Figure
Figure 21
1. Parking brake
Parking Brake
Use the parking brake
machine from moving. To engage the parking brake,
push down on the brake pedal and press the top
forward to latch. To release the parking brake, press
the brake pedal until the parking-brake latch retracts.
19) and raise or lower the
21) to stop the machine.
2. Brake pedal
(Figure 21) to prevent the

InfoCenter

Using the InfoCenter LCD Display
The InfoCenter LCD display shows information
about your machine, such as the operating status,
various diagnostics, and other information about the
machine (Figure
information screen, cutting unit (CU) motor information
screen, and traction information screen.
•
Splash screen: shows current machine
information for a few seconds after you move the
g005105
key to the O
•
Main information screen
current machine information while the key is in the
O position.
N
•
CU motor information screen
shows the speed and current of each reel motor.
1. Front left cutting motor
2. Front right cutting-unit
motor
•
Traction information screen
shows the current steering angle and the
amperage allotted to each traction motor.
g236365
15
25). There is a splash screen, main
position.
N
(Figure
Figure 22
(Figure
Figure 23
3. Center cutting-unit motor
(Figure
22): shows
g296103
23):
g292767
24):