Connecting The 12 V Battery; Installing The Grass-Basket Hooks - Toro Greensmaster eTriFlex 3360 Operator's Manual

5

Connecting the 12 V Battery

Parts needed for this procedure:
2 Screw (M5)
2 Nut (M5)
Procedure
WARNING
Incorrect battery cable routing could damage
the machine and cables causing sparks.
Sparks can cause the battery gasses to
explode, resulting in personal injury.
Always connect the positive (red) battery
cable before connecting the negative (black)
cable.
The 12 V battery is below the operator's seat on the
right side of the machine
1. Right side cover
2. Bolt
1. Remove the right side cover
2. Remove the battery cover to access the battery.
3. Use a M5 screw and nut to connect the positive
(red) battery cable to the positive (+) terminal.
4. Use a M5 screw and nut to connect the negative
(black) battery cable to the negative (-) terminal.
(Figure 9).
Figure 9
3. Battery cover
4. 12 V battery
5. Torque the screws and nuts on the terminals to
3 to 4 N∙m (34 to 37 in-lbs).
6. Apply battery terminal protector (Toro Part
No. 107-0392) or a light layer of grease to
the battery terminals and cable connectors to
reduce corrosion.
7. Install the cover over the battery.
8. Install the right side cover.
6
Installing the Grass-Basket
Hooks
Parts needed for this procedure:
6 Grass-basket hook
12 Flange bolts
Procedure
Use 12 flange bolts to install 6 grass-basket hooks
onto the ends of the suspension-arm bars
g291736
1. Flange bolt
2. Grass-basket hook
10
(Figure
Figure 10
3. Suspension-arm bar
10).
g015492