Toro Greensmaster eTriFlex 3360 Operator's Manual page 16

Figure 24
1. Amperage—Front, left
traction motor
2. Amperage—Front, right
traction motor
•
Main menu: refer to
Menu Items (page
Note:
Protected under Protected
Menus—accessible only by entering PIN;
refer to Accessing Protected Menus (page
You can switch between the main, CU motor, and
traction information screens by pressing the right
button and then selecting the appropriate directional
arrow.
Figure 25
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—Press this
button to access the InfoCenter menus. You can
use it to back out of any menu you are currently
using.
•
Middle Button—Use this button to scroll down
menus.
•
Right Button—Use this button to open a menu
where a right arrow indicates additional content, or
to select an option.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button will be labeled with an icon displaying its
current function.
3. Amperage—Center
traction motor
4. Steering angle
Understanding the InfoCenter
17).
19).
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
g292769
g020650
16
Indicates when scheduled service
should be performed
Engine rpm/status—indicates the
engine speed (rpm)
Hour meter
Info icon
Function-control switch is in the
T position.
RANSPORT
Function-control switch is in the M
position.
Indicates when the cutting units are
being raised.
Indicates when the cutting units are
being lowered.
Operator must sit in seat
Parking-brake indicator—indicates
when the parking brake is engaged
Function-control switch is in the
N position.
EUTRAL
PTO is engaged
Engine start
Stop or shutdown
Engine
Key switch
PIN code
CAN bus
InfoCenter
Switch
Operator must release switch
Operator should change to indicated
state
Traction motor
OW