Inspecting The Fuel Lines And Connections; Electrical System Maintenance; Electrical System Safety; Disconnecting Or Connecting Power To The Machine - Toro Greensmaster eTriFlex 3360 Operator's Manual

5. Install the new filter with the arrow on the filter
body pointing away from the fuel tank.
6. Ensure the hoses and hose clamps are secure
to the filter.
7. Open the fuel-shutoff valve and fill the tank.
Inspect the fuel lines for any leaks or loose
connections.
Inspecting the Fuel Lines
and Connections
Service Interval: Every 2 years
Inspect the fuel lines for deterioration, damage, or
loose connections.
Electrical System
Maintenance

Electrical System Safety

•
Disconnect the main-power connectors before
repairing the machine.
•
Charge the battery in an open, well-ventilated
area, away from sparks and flames. Unplug the
charger before connecting or disconnecting the
battery. Wear protective clothing and use insulated
tools.
Disconnecting or
Connecting Power to
the Machine
The main-power connectors provide power from
the batteries to the machine. Disconnect the power
by separating the connectors; connect the power
by installing the connectors together. Refer to
Main-Power Connectors (page
Charging the 12 V Battery
to the 12 V System
WARNING
Incorrect battery cable routing could damage
the machine and cables causing sparks.
Sparks can cause the battery gasses to
explode, resulting in personal injury.
• Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
• Always connect the positive (red) battery
cable before connecting the negative
(black) cable.
The 12 V AGM battery
InfoCenter, brake actuator, machine controller, and
the CAN isolation module.
43
20).
(Figure 48) powers the