Specifications - Toro Greensmaster eTriFlex 3360 Operator's Manual

Main-Power Connectors
Before working on the machine or installing, removing,
or working on the cutting units, disconnect the
machine from the power supply by separating the
main-power connectors
base of the rollover bar on the left side of the traction
unit. Plug the connectors together before operating
the machine.
Figure 26
1. Main-power connectors
CAUTION
If you do not disconnect the power to the
machine, someone could accidentally start
the machine, causing serious bodily injury.
Always separate the connectors before
working on the machine.
(Figure 26), located at the
Fuel-Shutoff Valve
Use the fuel-shutoff valve to control the fuel flow to the
engine. The valve is located under the hood, adjacent
to the carbon canister.
Figure 27 shows the valve in the O
close the valve, turn the valve clockwise
to the C
LOSED
1. Fuel-shutoff valve (O

Specifications

g236363
Refer to Figure 28
21) for dimensions and weight.
Note:
Specifications and design are subject to
change without notice.
20
PEN
position.
Figure 27
position)
PEN
and the Specifications Table (page
position. To
(Figure 27)
g280170