Toro Greensmaster eTriFlex 3360 Operator's Manual page 48

Fluid specification: SAE 80W90
Gearbox oil capacity: approximately 384 ml (13 fl oz)
1. Raise the machine; refer to
(page 37).
Important:
The machine must be level so
that the correct amount of fluid can be added
to the gearbox.
Ensure that the machine is level on the jack
stands.
2. Perform the following steps to remove the left
and right-sided tires:
A. Loosen and remove the wheel lug nuts
(Figure 59).
1. Lug nut
B. Remove the left and right tires.
3. Place a drain pan under the wheel-motor
assembly (Figure
Raising the Machine
Figure 59
60).
Left side of the machine shown
1. Drain port
2. Drain plug
g280226
4. Remove the plug from the drain port
Note:
The drain port is located on the bottom of
the gearbox.
Note:
Allow the oil to drain completely from
the gearbox.
5. Clean the plug.
6. Install the drain plug into the drain port
60).
7. Remove the vent hose and fitting from the top of
the gearbox
48
Figure 60
3. Pan
(Figure 61).
g278148
(Figure 60).
(Figure