Transmit A User Duress Report; Transmitting A User Duress Report When The System Is Armed - 2gig Technologies EDGE User Manual

6 . Tap to select/deselect new images captured by
the panel's camera to associate them with the
current profile.
7 . Confirm that the photos belong to the person
who's profile is being updated. Photos are
associated with the user code used to disarm
panel after a Facial Recognition update event .
NOTE: It's best to deselect photos that don't
display a good representation of the face (ex:
center photo displayed) .
8 . Tap UPDATE PROFILE .
9 . Once the Face Profile has been successfully
updated, tap OK .
10 . Tap to return to previous menus .

Transmit a User Duress Report

You can enter the Duress Code to transmit a user duress
report to the Central Station without alerting an intruder
that you're calling for help .
Transmitting a User Duress Report when the
System is Armed
To transmit a user duress report when the system is
armed:
1 . At the System Armed screen, tap DISARM .
2 . Enter the Duress Code .
The system disarms and transmits a silent duress report
to the Remote Service Provider .
Update Profile - Select Images
Update Profile Success
System Armed—Disarm Button
Enter the Duress Code
29
Copyright © 2021 Nortek Security & Control LLC