Transmit A Duress Signal When System Is Disarmed; In The Event Of A Burglary Alarm; Silencing The Alarm Sounder (For False Alarms) - 2gig Technologies EDGE User Manual

Transmit a Duress Signal when System is
Disarmed
To transmit a user duress report when the system is
disarmed:
1 . At the Home screen or from one of the menus,
press and hold the 2GIG logo .
2 . At the Keypad, enter the Duress Code .
The system will return to the Home screen, and the
duress signal is sent to the Central Station .
NOTE: See Activate the Duress
for Duress Code activation instructions .

In the Event of a Burglary Alarm

If one or more armed sensors are tripped while the
system is armed in Stay or Away Mode, an alarm
condition will occur, and the system's alarm siren will
sound .
If an Entry Delay sensor is tripped while the system
is armed in Stay or Away Mode, the Entry Delay
countdown starts to give you time to disarm the system .
If the system is not disarmed before the countdown
expires, an alarm condition occurs, and the system's
alarm siren will sound .
If more than one armed sensor is tripped, the system
displays the triggered sensors in chronological order .

Silencing the Alarm Sounder (for False Alarms)

If the system is in an active alarm state, any person with an active user code can silence the sounder by disarming the
system .
»
If you disarm the system BEFORE the Abort Window Dialer Delay countdown expires, the system
cancels the alarm and stops the alarm report from being transmitted to the Central Station .
»
If you disarm the system AFTER the Abort Window Dialer Delay countdown expires, the system
silences the alarm and transmits an alarm cancellation report to the Central Station .
NOTE: Consult your installer to determine how the Alarm Abort Window Dialer Delay feature is configured on
your system (15-45 seconds). This setting specifies the number of seconds end users have to manually abort
the alarm, in the event of a false alarm . For ANSI/SIA CP-01-2010 compliance, the default setting is 30 seconds .
For UL 1023: Household Burglar Alarm Units compliance, this setting may be configured to a maximum of 45
seconds .
2GIG EDGE User Guide
Code, page 52,
30
System Logo
Enter the Duress Code
Alarms Screen—Multiple Alarms in Chronological Order