Force Bypassing; Opening A Sensor When The System Is Disarmed; Force Bypassing A Sensor - 2gig Technologies EDGE User Manual

Force Bypassing

When a protected door or window is open, the system
places the sensor on its Sensors Not Ready list . In order
to arm the system, one must either close the sensor or
place it on the system's Bypassed Sensors list .
Bypassed Sensors are ones that are intentionally
left unprotected . This method of bypassing a sensor
is called Force Bypassing . To learn how to manually
bypass a sensor, see Manually Bypassing a
pg . 54 .
Opening a Sensor When the System is
Disarmed
When a protected door or window is opened while the
system is disarmed, the 2GIG EDGE Panel responds as
follows:
»
The system status message on the
touchscreen reads System Not Ready to Arm .
»
The Sensors Not Ready list and BYPASS
ALL button appears .
»
The name of the protected zone appears on
the Sensors Not Ready list .
»
The number of open sensors appears in the
top-right corner of the list .
»
The system uses the voice descriptor
assigned to the sensor to announce that the
protected zone is open . If Chime is enabled,
see Chimes, page 55 .

Force Bypassing a Sensor

If you want to arm the system and ignore the open
sensor, you must force bypass the sensor .
To force bypass the sensor:
1 . Below the Sensors Not Ready list, tap BYPASS
ALL .
2 . At the Enter your code to bypass sensors
screen, enter an active user code .
3 . When the system status message changes to
System Ready to Arm (BYPASS), you can arm
the system . See Arming the
Sensor,
System, pg . 21 .
23
System Not Ready to Arm—Sensors Not Ready List
WARNING!! A bypassed burglary protection sensor
does NOT provide security protection when the
system is armed . See Bypass
NOTES:
1 Residential alarm systems do not permit you
to bypass sensors installed in fire, carbon
monoxide, or emergency zones .
2 In order to bypass a sensor, you must enter a
valid User Code .
Sensors Not Ready > Bypass All
Enter an Active User Code to Bypass Sensors
Sensors, pg . 54 .
Copyright © 2021 Nortek Security & Control LLC