System Status Messages; System Icons - 2gig Technologies EDGE User Manual

System Status Messages

At the top-left of the screen, different messages appear to reveal the current system state .
System Status Messages
This table describes the different system status messages on the system .
This system status message . . .
System Ready To Arm
System Not Ready to Arm
System Ready To Arm (BYPASS)
System Arming (STAY)
System Arming (AWAY)
System Armed (Stay)
System Armed (Away)
Restarting Security Process

System Icons

The status bar that appears on the top of the Home screen and on most system menus reveals a variety of icons
providing system information and access to different functions .
System Status Bar
System Icons
Status Icons
Battery Power Status
Battery Charging
On-Board Camera is active
Power
Power Disconnected
Indicates all sensors are closed and the system is ready to be armed .
One or more sensors are open .
The system is ready to arm and one or more sensors are on the Bypassed Sensors list .
Force Bypassing
See , pg . 23 .
The system is in the process of arming itself in Stay Mode .
The system is in the process of arming itself in Away Mode .
The system is armed and protecting the premises in STAY or AWAY mode .
The security system is restarting. Typically, this only appears after an installer modifies a
System Configuration setting.
13
Indicates that . . .
Action Icons
Notifications
Turn Display Sleep Mode On
Audible Beeps On
Audible Beeps Off
Update is available
Copyright © 2021 Nortek Security & Control LLC