Panel Tests; Cell Radio Status - 2gig Technologies EDGE User Manual

Panel Tests

Tests the function of the 2GIG EDGE Panel's audio and
status LED .
1 . Tap Panel Tests (
2 . Tap Button LED Test; Emergency, White .
A confirmation message appears.
3 . Tap one of the following buttons:
• No: Tap this button if the LED does not
match what is described in the message .
• Yes: Tap this button if the LED matches
what is described in the message .
4 . Repeat the above steps for each listed Button
LED test .
5 . Tap CONFIRM .

Cell Radio Status

This option displays the cell radio's Signal Strength,
Serial Number, Subscriber ID, as well as status for
Registration, Connection, Power and SIM .
1 . To test the Cell Radio, tap TEST CELL RADIO .
"Cell Radio Test in Progress" will be displayed .
2 . If the test is a success, a prompt is displayed .
3 . Tap OK to return to the Cell Radio Test & Status
screen .
) .
Panel Tests
Cell Radio Status
57
Copyright © 2021 Nortek Security & Control LLC