Clear The Alarm History - 2gig Technologies EDGE User Manual

To clear an alarm:
1 . At the Alarm screen (after the Burglary Bell
Cutoff Time or Fire Bell Cutoff Time expires),
enter an active user code .
2 . Depending on how quickly you enter your code,
one of the following occurs:
a . If you enter your code before the Alarm
Cancel Time countdown expires, the following
message appears .
NOTE: Consult your installer to determine how
the Alarm Cancel Time setting is configured
on your system . For compliance with ANSI/SIA
CP-01-2010, the factory default setting is five (5)
minutes .
b . If you enter your code after the Alarm Cancel
Time countdown expires, the system reveals
the Alarm History .
The system clears the alarm . You can also clear the
Alarm History .

Clear the Alarm History

After an alarm is activated on the system while you
are way, a notification message appears in the Alarm
History .
To clear the alarm history:
1 . Tap the Message system icon . Then tap Alerts .
2GIG EDGE User Guide
Enter Your Code to Clear the Alarm
Alarm Report Already Transmitted ... Cancel Being Sent
Alarm History
New Alerts
32