Chimes; On-Board Camera - 2gig Technologies EDGE User Manual

Chimes

The master user can assign chimes to sensors to
provide notification anytime a sensor is opened.
1 . At the System Settings screen, tap Sensor
Chimes ( ) .
2 . Select a sensor from the list .
3 . Tap the new setting .
4 . Press the back button (
previous menus .

On-Board Camera

Adjust settings for the On-Board camera .
NOTE: On-Board camera is enabled by default .
If disabled, all on-board camera features will be
unavailable .
1 . At the System Settings screen, tap On-Board
Camera ( ) .
2 . Tap Photo Capture Settings (>) .
3 . Tap to Enable or Disable an Event .
4 . Tap when finished.
) to return to the
55
Sensor Chimes
Select Sensor Chime
Built-In Camera Settings
Photo Capture Settings
Copyright © 2021 Nortek Security & Control LLC