Users; Types Of User Codes; Adding A User - 2gig Technologies EDGE User Manual

Users

The Users menu lets you add, edit, and delete users
from the system .
NOTES:
1 To use this feature, you must know the
Master User Code .
2 The system may be configured for 4 or 6-digit
pin codes . Consult with your installer to
determine the pin code length of the system .

Types of User Codes

There are different types of user codes to provide users
with access to various system features:
IMPORTANT: Do Not Share Your User Codes .
»
User Code: A unique code to identify different system users and provide them with the ability to disarm the
system .
»
Master User Code: A code typically known by one or two members of a household . The default code is
To secure this code, it is recommended that you immediately change the default code to a unique one .
NOTE: If the system is configured for 6-digit pin codes, the default Master User code is
»
Duress Code: A code that you enter to silently notify your Remote Service Provider of an emergency event,
such as being forcibly held against your will by an intruder .

Adding a User

You can add new users to the system . The system
supports a total of 100 user codes (this includes both the
Master User Code and Duress Code) .
To add a user:
1 . The first time you are adding a user, you will
notice that two (2) users have already been
created . The Master User and the Duress user .
2 . Tap ADD USER .
3 . At the Enter a Name for the New User screen,
type the name for the new user . Then tap NEXT .
4 . At the Enter a code for User <Name> screen,
enter a unique code for the new user . Tap NEXT .
NOTE: If you attempt to add a code that is
already in use, the system prompts you to enter a
different code . Every user code must be unique .
5 . Enter a name for the new user .
Settings
Users
Enter User Name
47
1111
.
111111
.
Copyright © 2021 Nortek Security & Control LLC