Disarm The System; Facial Recognition Profile Update - 2gig Technologies EDGE User Manual

Disarm the System

When the system is armed, the Armed (Stay or Away)
screen is displayed .
To disarm the system:
1 . Tap the DISARM button .
2 . To disarm with Facial Recognition, align the
user's face within the frame of the camera,
slightly moving the head from side to side .
OR
3 . Tap the KEYPAD button to access the keypad
and disarm using the disarm code .
IMPORTANT: Facial Recognition does not detect
Duress . During a Duress situation, avoid making
the face detection gesture . Instead, tap KEYPAD
then enter duress code .
4 . (OPTIONAL) Enter the Duress Code .
The system disarms and transmits a silent duress report
to the Remote Service Provider .

Facial Recognition Profile Update

Due to differences in lighting and other factors during
Facial Recognition disarming, there may be times when
the panel prompts Face Not Recognized .
When this occurs, the Enter Code screen will appear, so
the panel can be disarmed using the designated four or
six digit disarming code .
NOTE: See Users, page 47, for Facial
Recognition setup instructions .
1 . Enter the four or six digit code to disarm .
Disarm the System
Disarm with Facial Recognition
Face Not Recognized
Enter Code
27
Copyright © 2021 Nortek Security & Control LLC