Change The Master User Or Duress Code - 2gig Technologies EDGE Quick Start Manual

Change the Master User or Duress Code

The Master User Code provides users with the ability to access the System Settings menu and, depending on the system configuration, provide access to other
pin-protected features . The Duress code lets users send a silent duress report to the Central Station . See Using the Duress Code on
IMPORTANT: When customizing codes for the system, it's best not use the dwelling's physical address, telephone digits, birth dates or
birth years . Codes should only be given to trusted individuals .
Tap System Settings ( ) from the Main screen, enter the system's Master User Code, and then tap the Users (
At the Users screen, tap the pencil icon (
next to Master User or Duress .
At the Edit Master User or Edit Duress User
)
screen, tap the pencil icon (
Code section .
) in the Access
23
page 18 .
) icon . Next, continue with these steps:
At the Enter a Code for the User screen,
input a unique code and tap Next . Then,
confirm the code and tap Done .
Copyright © 2021 Nortek Security & Control LLC