Date & Time; System Tests; Sensors Test - 2gig Technologies EDGE User Manual

Date & Time
Set the panel's Date and Time .
1 . At the System Settings screen, tap the Date &
Time (
) icon .
2 . Use your finger to scroll and set Time and Date
settings .
3 . Tap when finished.
NOTE: Date & Time is automatically updated
during panel registration .

System Tests

To ensure continued protection and proper system
operations, it is important to perform a sensor and
console test on a weekly basis .
NOTE: To use this feature, you must know the
Master User Code .
At the System Settings screen, tap System Tests (
There are six tests available .

Sensors Test

Tests signals between the installed sensors and the
Control Panel .
1 . Tap Sensor Tests (
EDGE Panel into Walk Test Mode and transmits a
Walk Test Started report to the Central Station .
2 . At the Sensors Test screen, review the list of
sensors installed with your system .
When tests are successful, a
appears to the left of the test name . This indicates the
sensor is operating and the wireless signal strength was
good .
WARNING!! If a RED
test failed . If the sensor continues to fail, contact
your dealer for technical assistance .
3 . Tap the button to return to the System Test
Menu .
2GIG EDGE User Guide
) . This places the 2GIG
GREEN check mark
appears, it indicates the
Date & Time Settings
System Tests
) .
Sensor Tests
56