Wps; Access Point - 2gig Technologies EDGE User Manual

WPS

Tapping WPS allows you to connect securely to routers that
support WPS .
1 . Tap WPS on 2GIG EDGE Panel .
2 . Tap Connect .
3 . Locate and press the WPS on your router . 2GIG
EDGE Panel will securely connect with the router .
4 . Once Authorization is successful, tap ACCEPT .

Access Point

Setup the 2GIG EDGE Panel Access Point .
1 . Navigate to the Settings menu .
2 . Tap Access Point (
3 . Tap the Access Point switch to Enabled .
»
Optional: Tap SSID to enter new SSID name
»
Optional: Tap Password to assign a password .
»
Optional: Tap the IP address . The last two octets
of the Access Point can be changed to customize
setup .
4 . After any edits have been made, press SAVE
SETTINGS to save revised settings .
5 . Tap .
2GIG EDGE User Guide
) .
WPS Button
WPS Authentication Started
WPS Authentication Successful
Access Point
46