Capturing Your Avatar - 2gig Technologies EDGE User Manual

Capturing Your Avatar

Following Facial Recognition Setup, you have the option
to capture a photo to use as your personal avatar image .
1 . Align your face in the camera, then tap
CAPTURE . Your photo will be displayed .
2 . If you want to use the photo, tap USE THIS
IMAGE .
3 . Tap RETAKE PHOTO to capture a new photo .
4 . Tap SKIP to decline capturing the avatar .
5 . Tap the activation switch adjacent to the
Recognition Modes you'd like to use with Facial
Recognition, then tap NEXT .
6 . Tap NEXT .
7 . The panel scans for discoverable Bluetooth
devices .
2GIG EDGE User Guide
Capturing your Avatar
Facial Recognition Modes
Assign Bluetooth Device
Scanning for Bluetooth Devices
50