TERRAIN COMPENSATION CALIBRATION
FIGURE 12. Terrain Compensation Calibration Wizard
1. Drive the machine forward 33 feet [10.1 m] and park on a flat surface.
NOTE:
The system must detect a converged GPS status with a green shield and a forward motion prior to
calibration to determine which direction is forward.
FIGURE 13. Terrain Compensation Calibration Wizard
2. Follow the on-screen instructions to begin the calibration process.
FIGURE 14. Machine Rear Axle Marked Before Terrain Comp Calibration
016-4010-001 Rev. F
CALIBRATION - HDU-SPECIFIC, MD, AND STEERING-READY
13