FIGURE 3. Power Hold Control Lever Position
PST TRANSMISSIONS
FIGURE 4. Transmission Settings Page for PST Transmissions
The current calibration values for Clutch pressed and released positions are displayed at the top of the
Transmission Settings page. These values may be useful for tuning or diagnostics of the system.
To recalibrate the clutch, select the calibrate button for the desired setting and follow the on-screen instructions to
properly complete the calibration.
USER RPM
Set the engine RPM range which the tractor will maintain during autonomous operations. The typical RPM range
is 900 to 2300, however the operator may want to adjust this range based upon field conditions or operational
concerns.
FOR EXAMPLE:
Limiting the maximum RPM may allow smoother shifting while maintaining better power with a
loaded grain cart.
016-4010-001 Rev. F
TIB SETTINGS
47