C
3
HAPTER
STEERING CALIBRATION
RESUME/DISENGAGE CALIBRATION
FIGURE 20. Resume Switch Verification Screen
1. Press the resume switch.
NOTE:
The screen should automatically advance to the next screen if the resume switch is detected.
NOTE:
If the On-Screen Engage widget is going to be used, select
should automatically advance to the next screen.
FIGURE 21. Disengage Calibration Screen
2. Calibrate the disengage sensor by turning the steering wheel.
NOTE:
The Disengage Status indicator will turn red while the steering wheel is being turned and will advance
to the next screen once calibration is complete.
NOTE:
Ir a pressure transducer or encoder is being used, a screen displaying the calibrated disengage value
will be displayed. This value is editable.
16
Use On-Screen
Raven RS1™ and RS Lite™ Calibration and Operation Manual
Engage. The screen