Menu System Explanation - Husqvarna PG 820 RC Operator's Manual

Menu system explanation

Home screen
Jan 05
PG820 RC
SEARCHING...
• Press 'OK' to access the sub-menus.
SETTINGS
• Browse with the arrow keys and confirm with "OK".
Jan 05
SETTINGS
SERVICE
STOP WATCH
• The function is used to measure the amount of time a
job takes. The time is counted from when the grinder
starts working.
- STOP WATCH OFF/ON for timer.
- RESET STOP WATCH Used to reset the stop-watch.
- (00:00:00) Shows the operating time in
hours:minutes:seconds.
Jan 05
STOP WATCH
[ OFF ]
RESET STOP WATCH
[ 00:00:00 ]
PAIR RADIO
• Pair the remote control with machine.
RADIO CHANNEL
• Select the required radio channel. Browse with the
arrow keys and confirm with "OK".
To change the radio channel, the remote control must
be paired and connected with the CAN cable to the
machine.
LANGUAGES
• Select the required display language. Browse with the
arrow keys and confirm with "OK".
20 – English
12:45
PG820 RC
READY
MENU
12:45 Jan 05
STOP WATCH
PAIR RADIO
RADIO CHANNEL
[ 3 ]
LANGUAGE
[ ENGLISH ]
TIME & DATE
12:45
OK
OPERATING
TIME & DATE
• Specify time, date and format for time and date
respectively. Browse with the arrow keys and confirm
with "OK".
Jan 05 12:45
MENU
SERVICE
12:45
ERROR LOG
• List of faults the machine has detected. For more
information, see the "Maintenance and service"
section.
CALIBRATION
• Calibration of machine controls.
- SPEED Machine speed.
- DISC direction of rotation and speed of grinding discs
via remote control.
- HEAD Direction of rotation and speed of planetary
head via remote control.
- JOYSTICK X Joystick deflection, right and left
respectively.
- JOYSTICK Y Joystick deflection, forward and back
respectively.
- MACHINE DISC Direction of rotation and speed of
grinding discs via control panel.
- MACHINE HEAD Direction of rotation and speed of
planetary head via control panel.
OPERATING HOURS
• Shows the number of operating hours since the
machine was manufactured.
PRODUCT INFO
• Information regarding the machine or remote control
is shown. Browse with the arrow keys and confirm
with "OK".
Jan 05 12:45
SET TIME
[ 12:45 ]
SET DATE
[ 01/05/14 ]
TIME FORMAT
[ 24h ]
DATE FORMAT
[ MM/DD/YY ]
Jan 05 12:45
SETTINGS
SERVICE
Jan 05 12:45
ERROR LOG
CALIBRATION
MACHINE HOURS
114420174 Hours
PRODUCT INFO