Maintenance And Service; General; Maintenance Schedule; Cleaning - Husqvarna PG 820 RC Operator's Manual

General

WARNING! The user must only carry out the maintenance and service work described in this
!
Operator's Manual. More extensive work must be carried out by an authorized service workshop.
The machine should be switched off with the power cable disconnected from the outlet.
Wear personal protective equipment. See instructions under the "Personal protective equipment"
heading.
The life span of the machine can be reduced and the risk of accidents can increase if machine
maintenance is not carried out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact your nearest service workshop.
Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.

Maintenance schedule

Daily maintenance

Cleaning

External cleaning
General inspection
Grinding discs
Functional
Power button
inspection
Stop/run switch
Emergency stop
Protective cover
Service
Cleaning
WARNING! Do not clean the machine with a water spray or similar.
!
36 – English

MAINTENANCE AND SERVICE

Weekly
maintenance
Planetary drive
system
6 monthly After 12-36 months
Internal components
of the machine
Drive system for
grinding discs