Run Mode - Daikin GYEQ20AN Service Manual

Troubleshooting the Outdoor Unit
1.3

RUN Mode

• When you press
• When terminating the RUN mode, press the
• RUN mode has four levels from 1 to 4. Use the
• You can switch the channels using the
Table 4.3/ List of RUN mode menu items
CH
items
∗ While in RUN mode, the display is automatically released from the checker five hours after the
115
NEXT
simplicity) button while SW1 is in the RUN position and the total operated hours are displayed,
RUN mode is activated.
("1.___________" appears on the LCD.)
operated hours are displayed. ([Caution] Be sure to operate as above when exiting from RUN
mode.)
between these levels.
Level 1
01. Outdoor unit data
02. Actuator operation
status 1
1. Outdoor
03. Actuator operation
unit
status 2
04. Not used
05. Not used
2. Special
operation Special operation mode
01. Indoor unit detail
02. Indoor unit
3. Indoor
thermostat ON status
unit
03. Indoor unit remote
controller ON status
01. ON/OFF unit
4. Item
(memory switch)
display
02. Data Units
termination of the operation, and it returns to showing the total operated hours.
ENTER
or (hereafter only
BACK
BACK
UP DOWN
and
Level 2 Level 3
Outdoor unit data display
Actuator operation status
1 display
Actuator operation status
2 display
Special operation mode
setting
Indoor unit No.
Indoor unit thermostat
ON status display
Indoor unit remote
controller ON status
display
Each item
Item display
SiAUY361411EA
NEXT
is indicated for
button repeatedly until the total
NEXT
and buttons to shift
buttons.
Level 4
Indoor unit information
display
ON/OFF display
Troubleshooting