Technical Specifications - Owon VDS6000 Series User Manual

VIII. Technical Specifications
i. Set the probe compensation at x10 for physical probe;
ii. Under suitable operation temperature, work the device for 30+ minutes without interval;
iii. Provided the environment temperature gets 5 degrees more, or less, to self-calibrate the device
through Utility menu, via "Self Cal" option (please refer to
The following technical specifications been measured on the basis of above operation,
Oscilloscope Part -
Bandwidth
Vertical Resolution (A/D)
Channel Q'nty
Mode
Acquisition
Sampling Rate
Input Coupling
Input Impedance
Supported Probe
Max Input Voltage
Input
Bandwidth Limit
Channel Isolation
Time Delay Between
Channel (typical)
Horizontal Sampling Rate
Self
VDS6102
VDS6102A
VDS6102
VDS6102A
2
sample, peak detect, average
VDS6102
VDS6102A
DC, AC, ground
1 MΩ ± 2%, in parallel with 15 pF ± 5 pF
x1, x10, x100, x1000
40V (DC + AC Peak)
20MHz, or fullband
100 : 1 @ 50Hz; 40 : 1 @ 10MHz
150 ps
VDS6102 2-CH
５９
Cal).
100MHz
8-bit mode 100 MHz
12-bit mode 100 MHz
14-bit mode 20 MHz
8 bits
8 bits / 12 bits / 14 bits
2-CH working 500 MS/s
1-CH working 1 GS/s
8-bit mode
2-CH working 12-bit mode
14-bit mode
8-bit mode
1-CH working 12-bit mode
14-bit mode
0.5 Sa/s - 500 MSa/s
500 MS/s
250 MS/s
125 MS/s
1 GS/s
500 MS/s
125 MS/s