How To Communicate The Device With Pc; Software Installation Solution; To Install Ni-Visa Driver - Owon VDS6000 Series User Manual

V. How to Communicate the Device with PC
to communicate the device with PC, it's a must to install software firstly.
i. software installation solution
i). full installation
Target user(s): general PC oscilloscope user(s), and programmer(s) gets secondary development
need
Installation process -
 On the basis that NI-VISA driver or similar VISA driver already worked normally onto PC, to install
PC Software from accompanying CD which comes along with device.
 Provided no proper VISA driver found onto target PC, as first step, to install
"ni-visa_19.5_online_repack.exe*" from accompanying CD which comes along with device.
*. This .exe file will instruct the user(s) to download NI-VISA driver, and the user(s) could choose necessary NI
package kit in the process as well.
The second step is to run "VDS6000Series_PC_Software.exe".
Note: According to the user preferences, different version NI-VSA available via -
through web browser, type "NI-VISA" onto search column, click NI-VISA Download web linkage from
visit www.ni.com
searching results, in accordance with the PC operation system and its version, to choose preferred suitable NI-VISA
version.
ii). simple installation
Target user(s): general PC oscilloscope user(s)
Installation process -
To install Runtime version NI-VISA driver from accompanying CD which comes along with device
firstly, after that, to run "VDS6000Series_PC_Software.exe".
iii). minimum installation
Target user(s): PC oscilloscope user(s) who only need to communicate the device with PC via direct
network cable (no requirements for USB communication)
Installation process -
To run "VDS6000Series_PC_Software.exe" from accompanying CD which comes along with device
directly.
Note: The users could refer to
direct network cable".
ii. to install NI-VISA driver
To assure PC software running normally, and smoothly, it is a must to install NI-VISA driver firstly.
Note: On condition that NI-VISA driver, or similar VISA driver already worked normally onto the target PC, step ii could be
skipped.
To run
device, to start NI-VISA driver installation,
xiii.how to use socket connection
from accompanying CD which comes along with
for "
when the device communicates with PC by
１１