How To Use Socket Connection - Owon VDS6000 Series User Manual

xiii. how to use socket connection
when the device communicates with PC by direct network cable
For the device, its default IP address / port goes in 192.168.1.172 / 8866.
When the device communicates with PC by direct network cable, the first 3 segments from the default IP
address of PC should read the same as those from the device, giving an example, both of 2 parties read
192.168.1.xxx (the last segment "xxx" could be different).
Note: The IP address of the device could not be modified before successfully communicating with PC.
i) to check target PC's network setting
giving an example, here we set IP address in 192.168.1.71
ii) to communicate device with PC
a. to power the device through adapter, or through USB connection cable via suitable USB
communication interface;
b. to communicate the device with PC via crossed network cable, each end connects each LAN port;
c. to start PC software;
d. to enter into "Utility" option, press "Network";
４１