How To Set The Vertical System From Pc Software; How To Set The Horizontal System From Pc Software; How To Set The Trigger System From Pc Software - Owon VDS6000 Series User Manual

14.
Shortcut to back to default factory settings, please refer to "Default" ;
Shortcut to export signal data, please refer to
Shortcut to switch between 3-window / 1-window VIEW. When working in 3-window VIEW, the
upper-left window is for XY mode.
Shortcut to hide/show Function Menu
Trigger extension window, please refer to
15.
16. Sample and Period extension window, please refer to
iii. how to set the horizontal system from PC software
Channel extension window for Channel 2, please refer to
17.
ii. how to set the vertical system from PC software
Channel extension window for Channel 1, please refer to
18.
ii. how to set the vertical system from PC software
19. Measurement Details extension window for Channel 1 and Channel 2, please refer to
vi. how to use automatic measurement
Cursor Measurement extension window, please refer to
20.
Yellow Pointer: to show the grounding base point (zero point) of Channel 2; provided no Yellow
21.
Pointer comes, it means Channel 2 is off.
22. Red Pointer: to show the grounding base point (zero point) of Channel 1; provided no Red Pointer
comes, it means Channel 1 is off.
The Displayed Area of Input Signal of Channel 1.
23.
Status Details List
i. following status appears when communicating the device and PC
Linking
Connect
Match
Syncing
ii. following status reflects the communication between the device and PC
Offline
USBFound
USBDrvErr
MachineNotSupport
the device is communicating with PC
the device successfully communicates with PC
the PC software is matching the device as per model type
the PC software is synchronizing the device's settings
no communication between PC software and the device
the device found
USB driver installation error appears
the device not identifiable
"Pause & Export" ;
iv. how to set the trigger system from PC software
ix. how to use cursor measurement
２０