10.5 Basic Settings of the RTEX Axis
● Be sure to set the RTEX axis,
1.
Double-click the servo amplifier object in the navigator pane.
2.
From the displayed menu, select "Edit Object".
The "RTEX Axis Setting" dialog box will be displayed.
10.5.1 General Settings
Select the "General" tab and set the following items.
(1) Virtual mode
You can set the real axis or virtual axis.
Use of the real axis: The real axis is used to actually control the servo amplifier.
Use of the virtual axis: A virtual servo amplifier is created in the GM1 Controller and its virtual
axis is used.
WUME-GM1RTXSU-01
10.5 Basic Settings of the RTEX Axis
10-13