Switching On And Basic Functions; Connecting To Audio Devices - Viscount Legend ‘70s Artist-W User Manual

SWITCHING ON AND BASIC FUNCTIONS

To switch on the instrument, please follow these simple rules
1.
Make sure that the [POWER] switch on the rear panel is set to 0.
2.
Make sure that all connected speakers or amplifiers (if any) are switched off.
3.
Connect the included power cable to the instrument.
4.
Turn the [MASTER VOLUME] knob counter-clockwise all the way to the lowest value (mute).
5.
If headphones are connected, do not wear them.
6.
Switch on the instrument by pressing the [POWER] switch.
7.
Switch on any connected speaker or amplifier.
8.
Adjust the instrument volume through the [MASTER VOLUME] knob.
To switch off the instrument, follow this procedure:
1.
Turn the [MASTER VOLUME] knob counter-clockwise all the way to the lowest value (no volume).
2.
Switch off any connected speaker or amplifier.
3.
Switch off the instrument by pressing the [POWER] switch.
NB
- Only use the AC power cable provided with the instrument. Using an incorrect cable may cause overheating or
electric shock.
- The cable provided with Legend '70s must not be used with other electrical appliances. Not following this
precaution may cause damage to electrical devices or cause fire.
- If the instrument is to be out of use for long periods, disconnect the plug from the power socket.
- The instrument can also be programmed to switch off automatically when idle for a certain period of time. To do so,
activate the Auto Power Off function, page 57.
-

Connecting to audio devices

Legend '70s is not equipped with internal loudspeakers. In order to produce sound, it must be connected to
external audio devices, such as amplifiers, loudspeakers or headphones connected to the jack (located under
the keyboard to the left). Legend '70s offers several ways to connect with external diffusors. Here are a couple
of examples. Follow the illustrations to make the connection according to your needs.
Connection with amplifiers or amplified speakers
Use a pair of amplified speakers (or amplifiers
with a line input) to play Legend '70s.
This connection needs two audio cables with
mono jack 1/4" connctors. Plug the jacks into
the AUDIO OUT MAIN [L/MONO] and [R]
outputs on the rear panel of the instrument, and
into the amplifiers' inputs, as in the image.
To play with a single amplifier (or amplified
speaker) only use the AUDIO OUT MAIN
[L/MONO] connector.
Legend '70s is equipped with two auxiliary
outputs: AUDIO OUT AUX [1] and [2]. These
can be used in conjunction with MAIN outputs.
Each module or effect can be assigned to an
audio output (see Output Routing parameter,
page 32 and 42).
AUDIO OUT AUX AUDIO OUT MAIN
[1] and [2] jacks [L/MONO] and [R] jacks
Keyboard amplifier or
powered speakers
EN - 19
Switching on and basic functions
Keyboard amplifier or
powered speakers
Legend '70s – User Manual