Midi Section - Viscount Legend ‘70s Artist-W User Manual

Width of the bell-shaped curve of the LOW band filter. The central frequency is defined by the Low
Low Q
Freq parameter. High values correspond to a narrower curve, so the sound is strongly affected
around the central frequency. Low values correspond to a broader curve, so the filter affects a
larger band of frequencies, and the sound changes more gradually around the central frequency.
Values: between 0.5 and 4.0
NB
This parameter is only available with Filter Type: Peaking.
Mid Freq MID band central frequency.
Values: between 250 and 2500 Hz
Mid Q Width of the bell-shaped curve of the MID band filter. The central frequency is defined by the Mid
Freq parameter. This parameter works exactly like the Low Q parameter described above.
Values: between 0.5 and 4.0
HIGH band central frequency
High Freq
Values: between 250 and 2500 Hz
Width of the bell-shaped curve of the HIGH band filter. The central frequency is defined by the
High Q
High Freq parameter. This parameter works exactly like the Low Q parameter described above.
Values: between 0.5 and 4.0
NB
This parameter is only available with Filter Type: Peaking.

MIDI section

The MIDI menu provides all the general MIDI settings of the instrument.
To access this menu, enter the SYSTEM page and place the cursor on the MIDI SETTINGS field, then press
the data entry dial.
Parameter name Description
This port sends and receives instrument control messages, such as keyboard events, pedals,
Control Port
wheels and panel controls.
Values:
 OFF: no message is sent or received.
 USB: control messages are sent and received through the USB [TO HOST] connector on the
rear panel.
 MIDI: control messages are sent by the MIDI [OUT] connector and received through the MIDI
[IN] connector on the rear panel.
MIDI channel sending and receiving instrument control messages
Global Channel
Values: between 1 and 16
Enable the transmission of keyboard events, panel and pedal controls, to the instrument's internal
Local Control
sound generation. We suggest to set this parameter as OFF while the instrument is connected to
a computer via USB with the Thru function active (thus sending back all data to Legend '70s) to
avoid double notes and MIDI loops.
Values: OFF, ON
NB
MIDI events are sent and received through the MIDI and USB ports according to the Control Port
parameter value, as described above.
Enable sending and receiving MIDI Bank Select and Program Change messages through the
Tx/Rx Program
control port.
Values: OFF, ON
Tx/Rx CC Enable sending and receiving MIDI Control Change messages through the control port.
Values: OFF, ON
Transmission of MIDI messages sent by Legend '70s.
Soft Thru
Values:
 OFF: no MIDI message is sent.
 MidiIn>MidiOut: messages received through the MIDI [IN] connector are sent to the MIDI [OUT]
connector.
 MidiIn>USB: messages received through the MIDI [IN] connector are sent to the USB [TO
HOST] connector.
 USB>MidiOut: messages received through the USB [TO HOST] connector are sent to the MIDI
[OUT] connector.
NB
For a thorough description of MIDI messages sent and received by Legend '70s refer to the MIDI Informations, page
MIDI - 1.
EN - 55
System menu
Legend '70s – User Manual