A.piano Section - Viscount Legend ‘70s Artist-W User Manual

Modifying a Program
Enable / disable the synchronisation of the Tremolo effect of the E.PIANO module with the Master
Trem Sync
Clock parameter. When the Tremolo Sync parameter is enabled (Tremolo Sync: ON), the Tremolo
modulation frequency is determined by the Master Clock and the Tremolo Speed parameter
determines the multiplier factor of the Master Tempo parameter (COMMON section) or of the
received MIDI Clock (page 30).
Values: OFF, ON
Enable / disable the Stereo mode of the Tremolo effect of the E.PIANO module. When this
Trem Stereo
parameter is disabled (Tremolo Stereo: OFF), the Tremolo output signal is centered in the stereo
image. When the parameter is enabled (Tremolo Stereo: ON), the output signal moves left and
right on the stereo image.
Values: OFF, ON
Enable / disable the Amplifier effect on the E.PIANO module.
Amp Switch
Values: OFF, ON
[AMP ON]
Amp Model Amplifier effect model on the E.PIANO module. There are 13 amplifier models, differing in pre-
amplifier, power amplifier, cabinet and speakers.
Values: Suit76, Wr200, Sweet, Vintage, '59 Clean, Twin, Small, Twin Punch, Lo-Fi, Punch Stack,
Fuzz Drive, Bass Stack, Sub Bass
Amp Drive Saturation (distortion) of the output Amplifier signal of the E.PIANO module.
Values: between 0.0 and 10.0
Bass Gain Set the gain (positive value) or attenuation (negative values) of the low frequencies generated by
the E.PIANO module.
Values: between -5.0 and +5.0
Treble Gain Set the gain (positive value) or attenuation (negative values) of the high frequencies generated by
the E.PIANO module.
Values: between -5.0 and +5.0

A.PIANO section

The A.PIANO menu includes all the configuration parameters of the
A.PIANO module (described at page 12). To access this menu, enter
the EDIT PROGRAM screen (page 28) place the cursor on the
A.PIANO field and press the data entry dial, or hold down the sound
selection knob of the module for a while (point 4, page 13).
NB
The following table includes all the available parameters of the A.PIANO module. The knob or button that allows direct
control of the parameter through the panel, is written under the parameter name.
Parameter name Description
Name of the selected timbre. There are 8 acoustic piano timbres, differing in their acoustic and
Timbre
mechanical characteristics. Use the Legend '70s Editor application to modify the selected timbre.
[timbre selector]
Changes made through this application affect all Programs.
Values: Piano 1, Piano 2, Piano 3, Piano 4, Piano 5, Piano 6, Piano 7, Piano 8
Switch Same function of the parameters described at page 42.
Volume
Output Routing
Reverb Send
Note Shift
Detune
Velocity Sens
Pitch Bend
Mod.Wheel
Sustain Pedal
Foot Switch1
Foot Switch2
Foot Control1
Foot Control2
Dynamic Dynamic range of the acoustic piano. Reduce (negative values) or increase (positive values) the
[DYNAMIC] level difference between pianissimo and fortissimo.
Values: between -5.0 and +5.0
Sound brilliance. When the value is 0 the sound is perfectly balanced. Negative values enhance
Brilliance
the bass frequencies and dampen the trebles: the result is a less brilliant sound. Positive values
[BRILLIANCE]
enhance the treble frequencies and dampen the bass: the result is a more brilliant sound
Values: between -5.0 and +5.0
Legend '70s – User Manual
EN - 44