Common Controls; E.piano Module - Viscount Legend ‘70s Artist-W User Manual

Common controls

On the left part of any module there are controls shared by all modules: On/Off button,
volume knob and status Led lights.
[ON / OFF] button.
1
Switches on/off the sound generated by the module (or the part of the module, if it
is comprised of multiple parts). When the Led light of this button is on, the module
is active and can receive data from the keyboard.
[VOLUME] knob.
2
Adjusts the volume of the sound generated by the module (or the part of the
module, if it is comprised of multiple parts).
Status Leds.
3
These Led lights show the status of several sound generation parameters. When the Led light is on:
- [ ]: the Split function is active (page 29, parameter Split Mode) and the sound is assigned to the
Lower part of the keyboard. You can activate the Split function and assign the sound to the lower
section by pushing [SPLIT] and the module [ON/OFF] button simultaneously. Once the sound has
been assigned, press [SPLIT] and [ON/OFF] (on the module) again, to assign the sound to the Upper
section.
- [ ]: the sound is currently transposed (page 42, parameter Note Shift).
- [ ]: the module output signal is assigned to the effect FX1 (page 42, parameter Output Routing).
To assign an effect, select the FX1 effect (to do so, press the [FX 1] button under the EFFECTS
section) then, while pressing [FX ON], push the [ON/OFF] button on the module. Once the effect has
been assigned, press [FX ON] and [ON/OFF] again to undo.
- [ ]: the module output signal is assigned to effect FX2 (page 42, parameter Output Routing).
To assign an effect, select the FX2 effect (to do so, press the [FX 2] button under the EFFECTS
section) then, while pressing [FX ON], push the [ON/OFF] button on the module. Once the effect has
been assigned, press [FX ON] and [ON/OFF] again to undo.

E.PIANO module

The E.Piano module allows the user to customise the
electric piano sounds (Rhodes, Wurlitezer and CP80).
This module is the state of the art of the Viscount PM
technology (Physical Modeling). Thanks to complex
algorithms, the instrument can reproduce faithfully the
dynamic and physic-acoustic features of the electric
piano, recreating the original sound with all its nuances.
The module is also equipped with dedicated effects:
the classic Tremolo, and an Amplifier simulator that
recreates the sound of different kinds of amps.
Panel controls are further expanded by many other
parameters that can be modified through the EDIT
PROGRAM menu (see E.Piano section, page 42) and
by the Legend '70s Editor
NB
Controls 1, 2 and 3 are further described under the Common controls section at page
Sound selector
4
Use this control to select an electric piano sound.
Position
Rhod 1, Rhod 2, Rhod 3, Rhod 4, Rhod 5
Wurl 1, Wurl 2
E.Grand
2
1
3
Description
Rhodes electric piano simulator.
Wurlitzer electric piano simulator.
Electric grand piano CP-80 simulator.
EN - 11
Front panel
1
7
4
9
5 6
11
Legend '70s – User Manual
2
3
8
10