Advanced Functions; Split And Manuals; Setting The Split Point; Voices - Viscount Cadet 21 Owner's Manual

Owner's Manual – Viscount Cadet 21

4.ADVANCED FUNCTIONS

4.1 SPLIT AND MANUALS

The Split point between Manual I and Manual II is E4 (left included) for default.
When Split is Off Manual II voices play on all the keyboard range.
When Split is On Manual I and Bass voices play on the left part of the keyboard (Split key
included) and Manual II play on the right part of the keyboard.
Bass section is monophonic, with left-priority.
If Split Point is set over 32 nd key (G4), Bass section won't play above this key.
To CHANGE THE SPLIT POINT press and hold down the [SPLIT] button; when the LED starts
blinking, press the key on the keyboard that you want as the new Split Point.
It is not possible to set a Split point higher than C7 or lower than C3. If the chosen Split Point
exceeds the upper or lower limit it will move to C7 or C3 (depending on whether it has exceeded
right or left).
Note: the Split point position isn't modified if Transposer is set to a value different from 0.

4.2 VOICES

There are eight orchestral voices, that can be associated to the five orchestra buttons (two for
manual I, three for manual II). The orchestral voices are: male choir, female choir, strings1,
strings2, harp, celesta, chimes, harpsichord.
To SELECT ANOTHER ORCHESTRAL VOICE to be loaded on an orchestra button, activate the
desired orchestra button, press [SET] together with the orchestra button. Repeat the procedure to
move between the eight voices.
It's possible to REGULATE VOICES VOLUME.
To adjust every single voice volume, follow this procedure:
Turn on the instrument while pressing [MEM1] + [MEM2] + [MEM3]. On startup every voice's
LED will turn on for a while and the Transposer LEDs will show the voice level.
The seven Transposer LEDs indicate seven possible volume levels in dB (from left to right): -6, -4,
-2, 0dB, +2, +4, +6. When a voice is chosen, the stop LED will start blinking.
9