In the fuser area
Open the side cover.
1
Remove the jammed paper, in the direction shown.
2
If the jammed paper is inside the fuser, remove the jammed paper in the
direction show.
Close the side cover. Printing automatically resumes.
3
In the duplex unit area
If the duplex unit is not inserted correctly, paper jam may occur. Make
sure that the duplex unit is inserted correctly.
Open the side cover.
1
Remove the jammed paper.
2
Close the side cover.
3
In the stacker (finisher)
Paper jam in front of finisher
Open the stacker front cover.
1
12.9
<Troubleshooting>