Image Tab; Copying Originals; Changing The Settings For Each Copy - Samsung CLX-8385NX Series User Manual

Image tab

• Erase Edge: Allows you to erase punch holes, staple marks, and
fold creases along any of the four documents edges. (Page 5.9)
• Erase Background: Prints an image with no background.
(Page 5.9)
• Margin Shift: Creates a binding edge for the document.
(Page 5.10)
• Scan Enhance: Use this feature for the better quality of copy-
output. (Page 5.10)
• Adjust Backside Image: Allows you to copy and image and
remove the back-side image shown through. (Page 5.10)

Copying originals

This is the normal and usual procedure for copying your originals.
Press Copy from the Main screen.
1
Place originals, face up, in the DADF, or you can use the scanner
2
glass with a single original document face down.
Adjust the settings for each copy such as Original Size, Reduce/
3
Enlarge, Duplex and more. (Page 5.3, Page 5.3)
Select the tray by pressing the appropriate tray on screen.
4
Enter the number of copies using the number keypad, if necessary.
5
Press Start on the control panel to begin copying.
6
Note
To cancel the current copy job, press Stop on the control panel.
Or you can delete the current and pending job using Job Status
on the control panel. Select the job you want to cancel and
press Delete.

Changing the settings for each copy

On the Basic tab of the Copy screen, you can select copy features
before starting to copy.
Note
The Basic tab setting is only for each copy. That means that the
setting does not apply to the next copy job. After finishing the
current copy job, the machine automatically restores the default
settings after certain time. Or the machine resume to default
setting when you press the Clear All button on the control panel
or when you press other menu such as fax or else except the
Job Status screen.
The default copy setting can be changed in Admin Setting.
(Page 10.2)
5.2
<Copying>