Samsung CLX-8385NX Series User Manual page 157

• If you click the Advanced button, you can search a
printer with the SNMP Community Name. Default
name is 'public'.
• If you do not see your printer on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your
printer to the network. To add the printer to the
network, enter the port name and the IP address for the
printer.
To verify your printer's IP address or the MAC address,
print a Network Configuration page in machine.
• To find a shared network printer (UNC Path), select
Shared Printer [UNC] and enter the shared name
manually or find a shared printer by clicking the Browse
button.
• If you select Add TCP/IP Port, you can enter IPv4,
IPv6 or the Hostname.
N
: If you cannot find your machine in network, please
OTE
turn off the firewall and click Update.
For Windows operating system, click Start → Control Panel
and start windows firewall, and set this option unactivated.
For other operating system, refer to its on-line guide.
6
After the installation is finished, a window appears asking
you to print a test page and to register yourself as a user
of Samsung Printers in order to receive information from
Samsung. If you so desire, select the corresponding
checkbox(es) and click Finish.
Otherwise, just click Finish.
N
: After setup is complete, if your printer driver doesn't
OTE
work properly, reinstall the printer driver. See "Reinstalling
Printer Software" on page 11.
Custom Installation
You can choose individual components to install and set a
specific IP address.
9
Installing Printer Software in Windows
1
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied printer's User's Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\Setup.exe, replacing "X" with the
letter which represents your drive and click OK.
If you use Windows Vista, Windows 7 and Windows 2008
Server R2 click Start → All programs → Accessories →
Run.
Type X:\Setup.exe replacing "X" with the letter which
represents your drive and click OK and type .
If the AutoPlay window appears in Windows Vista,
Windows 7 and Windows 2008 Server R2, click Run
Setup.exe in Install or run program field, and click
Continue in the User Account Control window.
3
Click Next.
• If necessary, select a language from the drop-down list.
4
Select Custom installation. Click Next.