Image Tab; Sending A Fax; Setting The Fax Header - Samsung CLX-8385NX Series User Manual

Image tab

• Original Type: Enhances the fax quality based on the type of the
original document being scanned. (Page 6.7)
• Darkness: Adjusts the level of lightness or darkness of the fax.
(Page 6.7)
• Erase Background: Reduces dark backgrounds or paper patterns
as in newspaper originals. (Page 6.7)
• Color Mode: Selects whether the user sends the fax in mono or
color. (Page 6.7)
• Back: Returns to the Basic tab.

Sending a fax

This part explains how to send a fax, and the special methods of
transmission.
Note
When you place the originals, you can use either the DADF or
the scanner glass. (Page 4.1) If the originals are placed on both
the DADF and the scanner glass, the machine will read the
originals on the DADF first, which has higher priority in
scanning.

Setting the fax header

In some countries, you are required by law to indicate your fax number
on any fax you send.
Press Machine Setup on the control panel.
1
Press Admin Setting. When the login message pops up, enter
2
password and press OK. (Page 3.5)
Press the Setup tab > Fax Setup > Machine ID & Fax No.
3
Touch the input area to enter the machine name and your fax
4
number.
Press OK.
5
Sending a fax
Press Fax from the Main screen.
1
Place the originals face up in the DADF.
2
Adjust the document settings in the Image tab.
3
Select Duplex and Resolution options in the Basic tab.
4
Note
If the originals are printed on both sides of the paper, select
2 Sided with left/right arrows in the Duplex feature.
When the cursor is blinking in the input line, enter the fax number
5
using the number keypad on the control panel. Or use Address
Book on the right side of the screen, if you have stored frequently
used fax numbers.
To add a number, press Add No.
6
Press Start on the control panel. The machine starts to scan and
7
send a fax to destinations.
Note
• When you want to cancel a fax job, press Stop before the
machine start transmission. Or press the Job Status button,
and select the job you want to delete, press Delete.
• If you used the scanner glass, the machine shows the
message asking to place another page.
• While the machine is sending a fax, you can not send an email
at the same time. (Page 7.4)
6.3
<Faxing (Optional)>