Book Copying; Booklet Copying; Cover Copying - Samsung CLX-8385NX Series User Manual

Note
The original must be placed on the scanner glass in order to
use this feature.
Press Copy from the Main screen.
2
Select the tray in Paper Supply.
3
Press the Advanced tab > Clone Copy.
4
Note
If this option is grayed out, select following options in the
Basic tab to activate it;
- Duplex to 1 -> 1 Sided
- Reduce/Enlarge to Original(100%)
- Paper Supply to Tray.
Press On to activate this feature.
5
Press OK.
6
Press Start on the control panel to begin copying.
7

Book copying

Use this feature to copy a book. If the book or magazine is thicker than
30 mm (1.18 inches), start copying with the scanner lid open.
Place the originals face down on the scanner glass. (Page 4.1)
1
Note
The original must be placed on the scanner glass to use
this feature.
Press Copy from the Main screen.
2
Press the Advanced tab > Book Copy.
3
Note
To remove shadows of a book edge, press the Image tab >
Erase Edge > Book Center and Edge Erase.
Select the binding option.
4
• Off: Disables this feature.
• Left Page: Prints left page of the book.
• Right Page: Prints right page of the book.
• Both Page: Prints both facing pages of the book.
Press OK.
5
Press Start on the control panel to begin copying.
6

Booklet copying

The machine automatically prints on one or both sides of the paper, which
are then folded to produce a booklet with all of the pages in the correct
sequence.
The machine will also reduce and correctly adjust the position of each
image to fit on the selected paper.
Place the originals face up in the DADF. Or place a single original
1
face down on the scanner glass. (Page 4.1)
Press Copy from the Main screen.
2
Select the tray in Paper Supply.
3
Press the Advanced tab > Booklet.
4
Press On to activate this feature, and select detailed settings for
5
each option.
• 1 Sided Original: Copys on one side of the paper.
• 2 Sided Original: Copys on both sides of the paper.
Press OK.
6
Press Start on the control panel to begin copying.
7
Note
This feature is possible only with A4, Letter, Legal, Folio, Oficio,
JIS B5, ISO B5, Executive, A5 and Statement sized paper.

Cover copying

The machine automatically adds covers to your copied set using stock
taken from a different tray. Covers must be the same size and orientation
as the main body of the job.
Place the originals face up in the DADF. Or place a single original
1
face down on the scanner glass. (Page 4.1)
Press Copy from the Main screen.
2
Select the tray in Paper Supply.
3
Press the Advanced tab > Covers.
4
Note
Once you have set the Paper Supply option to Auto, you
cannot use this feature.
Press On to use this feature, and select detailed settings for each
5
option.
• Position: Selects whether the cover will be placed at the front,
back, or both.
• Cover Sheet: Selects whether the cover will be 1 sided, 2 sided, or
blank paper.
5.7
<Copying>