Authentication - Samsung CLX-8385NX Series User Manual

Option
Machine supports IPv6 addresses for network
IPv6
printing and managements.
• IPv6 Activate: When you select On, the Host
Name and Link-Local Address will
automatically be entered into the address
field.
• DHCPv6 Configuration: If you have a
DHCPv6 server on your network, you can set
one of the option for default dynamic host
configuration.
• Routers: Use DHCPv6 only when
requested by a router.
• DHCPv6 Addresses: Always use
DHCPv6 regardless of router request.
• DHCPv6 Off: Never use DHCPv6
regardless of router request.

Authentication

This feature lets you control and lock all outgoing data, or change the
password.
Press Machine Setup on the control panel.
1
Press Admin Setting. When the login message pops up, then enter
2
password and press OK.Press the Setup tab > Authentication.
Option
Authentication No
Mode Authentication
Mode
Network
Accounting
Standard
Accounting
Description
Description
It disables Authentication Mode.
It enables the authentication mode
which is set from the Job Account
menu in the SyncThru™ Web
Admin Service.
You can set the local account for a
certain user. If the user with that
account performs the printing job,
the machine counts it.
Option
Authentication Foreign Device
Mode Interface
(continue)
Change Admin. Password
10.7
<Machine status and advanced setup>
Description
When you install the optional FDI
kit, select On to activate it.
• Job Timer: If there is not enough
credit, you can set the machine to
cancel a job right away or wait a
designated amount of time for a
deposit.
• Print Job Control: When it is
enabled, the both computer
printing and copying are possible
since the credit remains. With
Disable, copy printing needs the
credit. However, when printing a
report or a fax, the credit is not
needed.
• Inhibit Services: When no credit
is left, the machine disables the
copy job only with Copy Only.
With All Service, scanning
service and copy job are
disabled.
• Internal Credits: It is used when
you cancel the job or when the
job is cancelled by the device due
to insufficient credits (coin) or is
canceled by user's request. If you
select Enable, the machine
deposits a credit equal to the
number of sheets that did not
print out correctly, then it prints
next job for free (for the amount
deposited). With Disable, even if
you cancel the printing job, the
machine includes jammed paper
in the count and the cost of
printing shall be recovered for the
pages already billed.
• Image Counter: Depends on
whether the machine counts
blank white pages.
You can change the password
for the Admin Setting
authentication.