Activating The Added Memory In The Ps Printer Properties; Replacing The Stapler - Samsung CLX-8385NX Series User Manual

Note
The notches and grooves illustrated above may not match
those on an actual DIMM and its slot.
Replace the control board cover.
6
Reconnect the power cord and printer cable, and turn the machine
7
on.
Activating the added memory in the PS printer
properties
After installing the memory DIMM, you need to select it in the printer
properties of the PostScript printer driver in order to use it.
Make sure that the PostScript printer driver is installed on your
1
computer. For details about installing the PS printer driver, see
Software section.
Click the Windows Start menu.
2
For Windows 2000, select Settings and then Printers.
3
For Windows XP/2003, select Printers and Faxes.
For Windows 2008/Vista, select Control Panel > Hardware and
Sound > Printers.
For Windows 7, select Control Panel > Hardware and Sound >
Devices and Printers.
For Windows Server 2008 R2, select Control Panel > Hardware >
Devices and Printers.
Select the Samsung CLX-8385X Series PS printer.
4
Click the right mouse button on the machine icon and select
Properties.
For Windows 7 and Windows Server 2008 R2, from context menus,
select the Printer properties.
Note
If Printer properties item has
printer drivers connected with selected printer.
Select Device Settings.
5
select the Installable Options section and set the necessary options.
6
Click OK.
7
mark, you can select other

Replacing the Stapler

When the stapler is completely empty, the message for installing the
staple cartridge appears on the display screen.
Open the finisher cover.
1
Pull the stapler unit out.
2
Lift the empty staple cartridge from the stapler unit.
3
Unpack the new staple cartridge.
4
14.2
<Installing accessories>