Replacing The Waste Toner Container - Samsung CLX-8385NX Series User Manual

Replacing the waste toner container

The life of the waste toner container unit is approximately 48,000 images
printing. When the life span of the waste toner container has expired,
Waste tank is full. Replace it appears on the screen display of the
control panel, indicating the waste toner container needs to be replaced.
Otherwise your printer stops printing.
To replace the waste toner container:
Turn the machine off, then wait a few minutes for the machine to
1
cool.
Open the side cover.
2
Open the front cover.
3
Push the lock lever up and pull the waste toner container out.
4
Note
When you pull out the waste toner container out of the
machine, move the container carefully not to drop it from
your hands.
Make sure that you lay the waste toner container on a flat
surface so that the toner does not spill.
Remove the container's cap from the container as shown below,
5
and use it to close the waste toner container openings.
Caution
Do not tilt or turn over the container.
Take a new waste toner container out of its package.
6
Insert the new container into position and then push it to make sure
7
that it is firmly seated in place.
Close the front cover, then the side cover.
8
Make sure that the cover is securely latched and then turn the
9
machine on.
Caution
If the cover is not completely closed, the machine will not
operate.
11.8
<Maintenance>