Samsung CLX-8385NX Series User Manual page 97

Option
You can print a report on the
Report Configuration
machine's overall configuration.
Report
You can set to print the information of
Fax Report
a fax reports.
• Multi Send Report: When you fax
• Fax Send Report Appearance:
• Fax Sent/Received Report: The
• Fax Send Report: The machine
The report shows the job of scanning
Report E-mail
and sending it via Scan to Email.
Confirmation
(Continue)
Report
• On: The report is printed whether a
• Off: No report is printed after
• On-Error: Only in case of error
The report shows the job of scanning
Scan to Server
and sending it via SMB and FTP.
Confirmation
• On: The report is printed whether a
• Off: No report is printed after
• On-Error: Only in case of error
You can clean the inside of a fuser
Clean Fuser
roller by printing a cleaning paper.
You can select among On, Off, Print
Now. Default setting is On.
Description
to several destination, set this
option to print a transmission report.
On is to print every time you send a
fax, the machine prints a
confirmation report. With On-Error,
only when the transmission error
occurred, the report will be printed
out.
You can select whether the image
on the confirmation report shows or
not.
machine stores the logs on each
transmission and prints out every
50 logs with this option On. It you
select Off, the machine stores the
logs but does not print.
prints the confirmation report after
each fax job, only when you send a
fax to one destination.
job successfully completed or
failed.
completing a job.
occurrence, the machine prints the
report.
job successfully completed or
failed.
completing a job.
occurrence, the machine prints the
report.
Note
You can also print machine's status information and browse
status with SyncThru Web Service. Open the web browser on
your networked computer and type the IP address of your
machine. When SyncThru Web Service opens, click
Information > Print information.
10.11
<Machine status and advanced setup>