Xoa Button; Power Saver Button; Interrupt Button; Managing Your Machine From The Website - Samsung CLX-8385NX Series User Manual

• Detail: Shows the detailed information of the selected option on the
Current Job, Completed Job and Active Notice list.
• Delete: Removes the selected job from the list.
• Delete All: Removes all the jobs from the list.
• Close: Closes the job status window and switches to previous view.

XOA button

When you press this button, you can use the XOA applications from the
display screen. Before using the XOA applications, they should be
installed. If the XOA button is not displayed, make sure that the machine
gets XOA license. For more information, contact your local Samsung
dealer or the retailer where you purchased your machine.
Note
If the message asking Auth. ID and Password, it means the
network administrator has set the authentication in SyncThru
Web Service.(Page 1.7)

Power Saver button

When the machine is not in use, save electricity with the provided power
save mode. Pressing this button puts the machine into power save mode.
(Page 3.6)
If you press Power Saver button for more than two seconds, a window appears,
requesting that you turn the power off. If you choose Yes, the power is turned off.
This button can also be used to turn the button on.
Status
Off • The machine is not in the power save mode.
• The machine is in the low power save mode.
Blue On The machine is in the power save mode.
Blink The machine is in the ready power save mode.

Interrupt button

When you press Interrupt button, the machine goes into interrupt mode
which means it stops a printing job for urgent copy job. When the urgent
copy job completes, the previous printing job continues.
Status
Off The machine is not in interrupt printing mode.
Blue On The machine is in interrupt printing mode.
Note
Interrupt mode is resumed at default value (Off) after the
machine is shut down or reset.
Description
Description

Managing your machine from the website

If you have connected your machine to a network and set up TCP/IP
network parameters correctly, you can manage the machine via
Samsung's SyncThru Web Service, an embedded web server. Use
SyncThru Web Service to:
• View the device information and check its current status.
• Change TCP/IP parameters and set up other network parameters.
• Change the printer properties.
• Set the machine to send email notifications and update you on the
machine's status.
• Get support for using the machine.
To access SyncThru Web Service:
Start a web browser, such as Internet Explorer, from Windows.
1
Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address
2
field and press the Enter key or click Go.
Your machine's embedded website opens.
Click Login.
3
The log-in window appears.
Enter the administrator's ID and password then click Login.
4
Note
• Enter the same administrator's ID and password to the touch
screen.
• If you do not login with administrator's ID and password, you
can see the machine's information only.
Change the settings as you want such as the machine settings,
5
network parameters, etc.
1.7
<Introduction>