4.3.3 In the Fuser Area or Around the Toner Cartridge
NOTE: The fuser area is hot. Take care when removing
paper from the machine.
1 Open the front cover and lightly push down on the
cartridge then pull to take it out.
4.3.4 In the Manual Feeder
"Bypass Jam" appears on the display when you try to
print using the manual feeder and the machine does
not detect paper, due to no paper or improper paper
loading.
The error message may also occur when the paper is
not properly fed into the machine through the manual
feeder.
In that case, pull the paper out of the machine.
Samsung Electronics
2 Remove the jammed paper by gently pulling it
straight out.
3 Replace the toner cartridge and close the front
cover.
Printing automatically resumes.
Alignment and Adjustmens
Service Manual
4-5