In The Fuser Area Or Around The Toner Cartridge; In The Manual Feeder - Samsung SCX-4100 Service Manual

6.3.3 In the Fuser Area or Around the Toner Cartridge

NOTE: The fuser area is hot. Take care when removing
paper from the machine.
1 Open the front cover and lightly push down on the
cartridge then pull to take it out.

6.3.4 In the Manual Feeder

"Bypass Jam" appears on the display when you try to print using the manual feeder and the machine does not detect
paper, due to no paper or improper paper loading.
The error message may also occur when the paper is not properly fed into the machine through the manual feeder.
In that case, pull the paper out of the machine.
Samsung Electronics
2 Remove the jammed paper by gently pulling it
straight out.
3 Replace the toner cartridge and close the front
cover.
Printing automatically resumes.
Alignment & Adjustments
Service Manual
6-5