Samsung CLX-8385NX Series User Manual page 104

Caution
Don't use sharp objects, such as a knife or scissors, to
open the imaging unit package. You could damage the
surface of the imaging unit.
Remove the paper protecting the surface of the imaging unit.
8
Remove the cap, and carefully pull the seal tapes out of the imaging
9
unit.
10 Thoroughly shake the new imaging unit side to side five or six times.
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
Caution
• Be careful not to scratch the surface of the imaging unit.
• To prevent damage, do not expose the imaging unit to
light for more than a few minutes. Cover it with a piece of
paper to protect it if necessary.
11 Labels inside the machine identify each imaging unit's position.
Holding the handles on the new imaging unit, push the imaging unit
until it locks in place.
12 Turn the imaging unit locking levers inwards until it locks in place
and close the inner cover.
13 Insert the waste toner container into position and then push it to
make sure that it is firmly seated in place.
14 Close the front cover, then the side cover.
15 Make sure that the cover is securely latched and then turn the
machine on.
Caution
If the cover is not completely closed, the machine will not
operate.
11.7
<Maintenance>